Three Lliquid Silicone Materials For Making Silicone Breast Implants

- Aug 13, 2020-

Silicone breast implants are also called artificial breasts and fake breasts. It is a substitute for breast cancer patients after resection. The chemical composition and physical structure of silica gel determine that it has many other similar materials that are difficult to replace: high adsorption performance, good thermal stability, stable chemical properties, and high mechanical strength.


So how are these silicone breast implants made? The following editor will introduce to you what materials are used to make silicone breast implants and how they are made.


First of all, the material for making breast implants. Needless to say, it must be silicone. There are many types of silica gel. Among them, liquid silica gel for prosthesis can be divided into three types.


First, add molded silica gel, with a hardness of 0 degrees. The 0 degree type is usually used for soft products. Its normal color is translucent. Most of the silicone breast prostheses on the market use this type of silicone to make breast prostheses. Similarly, the chest stickers used by our girls are also made of this material, 0 degree silicone; of course, there will be another series that will be introduced to you below


Second, silicone gel. The surface of silicone gel is extremely sticky, so there must be a layer of prosthetic milk film on the surface when making prosthetic milk. One feature of silicone gel is that it is softer than the 0 degree silicone described in the previous article. Very comfortable. At the same time, silicone gel is also an excellent material for making breast implants and powder puffs.


The third one is also a relatively special one, and the current process is slightly fully mature. That is, foaming breast milk. The prosthetic breast shape is made by foaming silicone foam, which is light and breathable. Please refer to the picture below


Our trial effect drawing


Another: a little knowledge is included: 0 degree silica gel mixed with ordinary urea at a ratio of 1:1, there will be an effect like the picture.