Silicone Rubber Products Of Inferior Quality And Quality Difference

- Aug 22, 2019-


         People who buy silicone rubber often depend on whether silicone rubber products are cheap, but what do you know about high quality products and low quality products when you buy silicone rubber products, the manufacturing principle of silicone rubber products, the difference between inferior and high quality silicone rubber products, the harm of inferior silicone rubber products?

Manufacturing principle of silicone rubber products:

      Silicone rubber products are a natural resin formula, containing a variety of inorganic compounds, mixed with silica powder, not only has high quality practicality and reliability, and the use of some low quality or low-cost raw materials, can greatly reduce the quality of silicone products, reduce product quality and life.

The difference between low quality and high quality silicone rubber products:

      1. Generally speaking, the life and adaptability of high-quality products are very strong. In non-human conditions, such as high and low temperature and instability, such as low temperature of 200 degrees or oil pressure, ozone can also be used for a long time to maintain a good life and number of times of use,without deformation, lack of tension in the use process and will not be damaged.

      Ii. Low-quality silicone products can also be used, but the difference of low-quality products lies in different raw materials and curing agents, so the difference between high quality products and low-quality products can be judged in the same environment.

    Nowadays, many industrial electronic accessories are replaced by silicone rubber products.

Hazards of low quality silicone rubber products:

           For many manufacturers of silica gel products using low quality raw materials for mass production, has obtained certain effect, but no matter whether the actual period of the product is qualified, many products on the market to get the feedback of consumer, the service life of the product is too short, the tensile strength is too low, the product viscosity phenomenon, however, these materials are caused by the silicone raw materials.

        In order to ensure the smooth surface of products, control the viscosity of silicon oil, the addition of silicon oil is too large, silicon oil destroyed the composition of silicon atoms, leading to insufficient pulling out of products, the decline of service life makes many products become low quality products with reduced performance.