I Understand The Production Process Of Baby Silicone Teether. What Are The Processing Methods?

- Jan 07, 2020-

I Understand the Production Process of Baby Silicone Teether. What Are The Processing Methods?

It is important for infants and young children to choose a high-quality molar product during their growth. There has been a big change from wooden sticks to silicone materials. Silicone materials are a well-deserved category of children's daily necessities in baby teethers. From the ratio of materials to the production process, it is more suitable for children's molars. With the upgrade and changes of this type of gum, do you know its production method and process?


Silicone teether is currently used for the production of solid silicone materials. The main processing method of the product is solid molding material, which is solidified by compression molding. Therefore, different processing methods have naturally increased the love of infants and young children. So what have you seen about the silicone gums?

241fwa254 (1).png

Monochrome animal shape, pure color silicone teether is a more common one. It is also a traditional product of silicone children's teether that is environmentally friendly and safe. It does not mix any mottled and patterned appearance. The raw materials are colorless, tasteless and non-toxic. To get acquainted with ordinary silica gel, you only need to smelt, press and solidify, and the liquid process only needs injection molding. What the product needs to ensure is the purity of its raw materials and the quality of the curing agent.

The secondary molding multi-color integrated process is considered to be a more popular product for children's silicone teethers. It can mainly achieve a variety of colors and patterns, and has greatly improved the appearance, ensuring the aesthetics and color of the product, and increasing infants and children. This product process can be made by two processing techniques. The more commonly used is compression curing secondary molding. The product is mainly filled with other secondary colors on the main color. The secondary color is first filled into the mold cavity after the molding is completed. The main color material is filled in the middle, and it is integrated under the condition of high temperature to achieve the multi-color integrated molding effect.


The use of the secondary molding process within four or five colors is not a big problem, but if there are too many colors, it can be produced by the glue-drop molding process. The glue-drop molding process mainly relies on the dispensing of the product's sub-color to fill the main The difference between color fillers and molded secondary molding is that it is integrally molded with multi-color solid-fixing, while molded silicone products manufacturers first cure the secondary color and perform secondary vulcanization, but the cost of epoxy products is relatively high. At present, For children's silicone dental gums, most of them are made by molding.


Adhesive-bonded silicone children's teethers are not a minority. This process is mainly used for splicing in different colors. The structure is more complex and cannot be used for one-piece molding. The bonding method of silicone products is a technical task. If it is not controlled well, the appearance of the product and the overflow of glue will affect the quality of the product, so the choice of glue, the amount of glue control and the method of dispensing are very particular. The specific operation method still needs to be combined with the structure of the glue tank of the product. Combined with testing, how to use the glue to achieve the best results.

For silicone baby teethers, the above methods are relatively common processes. Because baby teethers need to be in contact with human skin and oral cavity for a long time, it is impossible to use surface spraying and large-area ink printing processes, so the baby bites his teeth The key problem of glue is that the quality and life of the product can be guaranteed on the raw materials.