As The Name Implies, The Silicone Button Is A Button Product Made Of Silica Gel

- Jan 25, 2019-

As the name implies, the silicone button is a button product made of silica gel. The silicone button is a product of silicone products. The silicone button has excellent heat resistance, cold resistance, environmental resistance, electrical insulation, fatigue resistance, etc. Features.

Silicone button rupture

1) The temperature is too high during molding. The silicone button becomes brittle when the temperature is too high during molding, and it is easily released after molding.

2) When the mold is released, many mold masters do not have professional training or work attentively when demoulding. If they are not demoulded according to strict work instructions, the silicone button will be broken.

3) The silicone button is not completely vulcanized. When the temperature of the silicone button molding mold is too low or the curing time is too short, the product will not be easily released from the mold.

4) The button silicone used is too bad, some factories blindly reduce the cost of using inferior button silica gel raw materials, resulting in poor quality of the silicone button produced, the rubber is too poor, the toughness is not good, the memory is broken,

5) The silicone key release is not good when the mold is pressed, which causes the product to rupture during the mold process.

6) A cavity having a rough surface or accumulating dirt is unfavorable for demolding, and a mold which is not easily demolded is easily broken.