Silicone Safety Performance

- Jun 27, 2019-


The main component of silica gel is silica, which is chemically stable and does not burn. Silica gel is an amorphous silica. The dust content in the workshop should be no more than 10 mg/m3. It is necessary to strengthen the exhaust and wear a mask when operating. 


Silica gel has a strong adsorption capacity and can cause dryness on human skin. Therefore, work clothes should be worn during operation. If the silicone enters the eye, rinse with plenty of water and seek medical attention as soon as possible. Blue silica gel is toxic due to the small amount of cobalt chloride. Avoid contact with food and inhalation. If a poisoning event occurs, seek medical attention immediately. When the silica gel is adsorbed by water vapor or other organic substances in the medium during use, the adsorption capacity is lowered and can be reused after regeneration.