How To Maintain Food Grade Silicone Cake Mold

- Aug 12, 2020-


Mold silicone nbsp;As an environmentally friendly material, silica gel does not contain any toxic substances. Food-grade mold silicone is fully compliant with third-party FDA food-grade certification. Food grade silicone molds can be made into mold silicone products for baking cakes, pizzas, breads, mousses, puddings, and chocolate-grade prepared foods, and can be made into different shapes according to customer needs, such as animal shapes, fruit shapes, And customize different colors, that is beautiful and practical. The following editor will teach you how to properly maintain food-grade mold silicone.


①After each use, it should be cleaned with hot water (diluted edible detergent) or placed in the dishwasher. Do not use abrasive detergents or foam. Make sure that the silica gel is completely dry before each use and storage.


②Silicone molds should be placed flat on the baking tray separately during baking. Do not dry-bake the molds, such as a 6 continuous mold. If only 3 molds are used, then the other 3 molds must also be filled with water. Otherwise, the mold will be damaged and the service life of the mold will be reduced. In order to ensure that the finished product can achieve the best baking effect, lightly spray a small amount of anti-stick baking pan oil on the surface of the mold silicone before baking.


③When the baking is completed, please remove the entire baking pan from the oven and place the baked product on the grid to be cooled until it is completely cooled!


④Silicone can only be used in ovens, ovens, and microwave ovens, and it is strictly forbidden to use gas, open flames or power on, or use it directly above the heating plate or under the grill!


⑤ Please do not use knives or other sharp tools on silicone products, and avoid heavy pressure and pulling!


⑥Silicone molds are more prone to dust due to static electricity. If they are not used for a long time, they should be placed in a paper box without direct sunlight!


⑦Please do not use cold water to rinse the mold immediately after it is out of the oven to extend the service life!