How Serious Are The Consequences Of Non-maintenance Of Silicone Rubber Products?

- Oct 29, 2019-

October,29th,2019

            It is often said that the Buddha relies on gold, and people rely on clothing. If a car is not maintained for a long time, it will be scrapped, not to mention the maintenance of a lady. However, the maintenance of this thing is sufficient for most of them. The car needs maintenance. People also need maintenance, so there are many things that need to be protected and protected. Even the molds of silicone rubber products are no exception. What is the role of maintenance? It is just that it can be upgraded to the normal use, and what is the maintenance of silicone mold?


          Some customers may just think that the mold only needs to be made for a long time. When it is finished, it is not necessary to take care of the secondary processing and continue to do it! ! If this is the case, then I think that the molds in the silicone rubber products manufacturers can basically do not have to work hard, but the ideal is very skinny, the reality is very cruel, if a set of molds are not used after maintenance, then there will be no in the subsequent production. Meaning, so the question about conservation can not be underestimated, no matter what is the same.


          Closer to home, the most important formal maintenance of silicone mold is that it is not damaged. Because the steel is affected by the moist air in the air, the corrosion is very strong. Rusting is a common aging phenomenon, so the general silicone products manufacturers In the process of lowering the mold, the mold is lubricated to allow the ink to be immersed in the core to keep the face from growing rust. Another method is to fill the cavity with silicone raw material. Do not have a certain amount of air in, this method is a long-term storage method, but the general mold requires the use of lubricating oil, ink cleaning once a month to prevent ink failure.


 

         For silicone molds, maintenance and oiling after production is a must-have method. Therefore, manufacturers need to pay attention to cleaning and cleaning at intervals. If the ink is not opened for a long time, it will be cleaned and blasted. The mold is rusty or even scrapped!