Cleaning and maintenance of silicone cups?

- May 13, 2019-

  In the life, everyone commonly used cups are made of plastic or stainless steel, ceramics, etc. Underneath, we will learn about a silicone cup made of silica gel. The silicone cup is made of environmentally friendly silica gel. The silicone cup features heat insulation and radiation protection. High temperature up to -80 to +320 degrees, to prevent breakage! Different from the glass, the silicone cup can be made in a variety of different colors, such as transparent, similar to the transparent glass, but also can be made a little brighter, can also be made into a fluorescent cup!

  During the use of the silicone cup, everyone will comment on such a problem. How to clean the silicone cup? AASIN will explain to you the following methods for cleaning and maintaining the silicone cup:

   1. After the first time and every time, use hot water (diluted detergent) or put it in the dishwasher. Do not use abrasive detergent or foam to clean. Make sure the silicone cup is thoroughly dried before each use and before storage.

   2. The silicone cup should be opened on the flat baking tray when baking. Don't let the mold dry, such as a six-piece mold, you only have three molds, and the other three molds must be filled with water. Otherwise, the mold will be baked and the service life will be reduced. In order to achieve the best baking effect of the baked product, a small amount of anti-stick baking oil can be sprayed on the surface of the silicone cup before baking.

3. The silicone cup can be heat resistant to 500 degrees Fahrenheit (260 degrees Celsius) and can withstand transient temperature changes, such as moving the baking cup directly from the refrigerator to the oven.

   4. When baking is complete, remove the entire baking tray from the oven and place the baked product on the grid to be cooled until it is completely cold.

   5. The silicon school cup can only be used in ovens, ovens and microwave ovens. It should never be used directly on gas or electricity, or directly above the heating plate or under the grill.

   6. Do not use the right knife or other sharp instruments on the silicone cup, can not be stressed, pulled, violent.

   7. Silicone mold (because of static electricity), it is easy to absorb dust, when not in use for a long time, it is best to put it in the carton and put it in a cool place.